Quiver

2023 Ibis Ripmo V2S vs 2025 Kona Process CR/DL

The M is the Kona Process CR/DL size closest to your M Ibis Ripmo V2S. We match frame stack and reach. This is a geometry comparison, not a fit recommendation; stem, spacers, handlebars and saddle setup also affect your riding position.

What changes on the Kona Process CR/DL

Compared with the Ibis Ripmo V2S in M, the Kona Process CR/DL in M places the top of the head tube 4 mm lower and 5 mm further back, relative to the bottom bracket. Its wheelbase is 19 mm shorter, which can contribute to quicker direction changes.

Frame stack
−4 mm
Lower front end
Frame reach
−5 mm
Shorter frame reach
Wheelbase
−19 mm
Shorter: quicker to change direction
Head angle
+0.6°
Steeper: sharper steering
Chainstays
±0 mm
About the same

The two frames

2023 Ibis Ripmo V2S (M) and 2025 Kona Process CR/DL (M), lined up at the bottom bracketBoth frames drawn to scale. The Ibis Ripmo V2S is drawn in full with its measurements, and the Kona Process CR/DL is the colored outline on top.J 1219

Ibis Ripmo V2S, MKona Process CR/DL, MDrawn to scale and lined up at the bottom bracket.

Geometry side by side

MeasurementIbis Ripmo V2S MKona Process CR/DL MDifference
Reach460455−5 mm
Stack619615−4 mm
Head tube angle64.965.5+0.6°
Seat tube angle7776.9−0.1°
Chainstay length435435±0 mm
Wheelbase12191200−19 mm
BB drop3030±0 mm
BB height341345+4 mm
Standover733700−33 mm
Seat tube length406380−26 mm
Head tube length10094−6 mm
Effective top tubenot listed599

Differences are the Kona Process CR/DL minus the Ibis Ripmo V2S. Full charts: 2023 Ibis Ripmo V2S, 2025 Kona Process CR/DL.

Where each sits in its class

Ibis Ripmo V2SKona Process CR/DL

AggressivePositionUpright
CalmSteeringQuick
PlayfulBalancePlanted

Each bike is ranked against the other trail bikes on Quiver, on frame geometry alone. Not your hand position or ride feel.

What each ships with

The stock build of each bike's first listed trim. Parts that match are dimmed.

PartIbis Ripmo V2SKona Process CR/DL134 CR/DL
Framenot listedKona Process
Forknot listedRockShox Pike Ultimate Charger 2.1 RC2
Rear shocknot listedRockShox Super Deluxe Ultimate Trunnion
Shifternot listedSRAM Pod Controller
Derailleurnot listedSRAM GX Eagle
Cassettenot listedSRAM GX Eagle
Cranksetnot listedSRAM GX Eagle Transmission
Bottom bracketnot listedSRAM DUB PF92
Wheelsetnot listedDT Swiss 350
Tirenot listedMaxxis Minion DHF, Maxxis Dissector
Brakenot listedSRAM G2 RSC
Rotornot listedSRAM CenterLine
Handlebarnot listedKona XC/BC 35
Stemnot listedKona XC/BC
Gripsnot listedKona Key
Headsetnot listedFSA Orbit 1.5E
Dropper postnot listedRockShox Reverb Stealth
Saddlenot listedWTB Volt

Know what is on every bike.

Add your bike to Quiver. Keep its parts, setup, and service history together, then share your build.

Explore the app
A Transition Relay build sheet: frame, fork, shock and drivetrainThe Relay’s ride photo galleryThe Relay’s ride spectrum and 2D frame geometryThe garage: five bikes and 99 recorded partsA Specialized Tarmac SL8 road build sheet