2026 Revel Rascal Frame Kit vs 2025 Kona Process CR/DL
The M is the Kona Process CR/DL size closest to your M Revel Rascal Frame Kit. We match frame stack and reach. This is a geometry comparison, not a fit recommendation; stem, spacers, handlebars and saddle setup also affect your riding position.
What changes on the Kona Process CR/DL
Compared with the Revel Rascal Frame Kit in M, the Kona Process CR/DL in M places the top of the head tube at about the same height and 5 mm further forward, relative to the bottom bracket. Its wheelbase is 3 mm shorter, which can contribute to quicker direction changes.
- Frame stack
- +1 mm
- About the same height
- Frame reach
- +5 mm
- Longer frame reach
- Wheelbase
- −3 mm
- Shorter: quicker to change direction
- Head angle
- +0.7°
- Steeper: sharper steering
- Chainstays
- −1 mm
- About the same
The two frames
We can't draw these frames yet. The Revel Rascal Frame Kit numbers we have for size M are missing the seat angle. The numbers below still compare.
Geometry side by side
| Measurement | Revel Rascal Frame Kit M | Kona Process CR/DL M | Difference |
|---|---|---|---|
| Reach | 450mm | 455 | +5 mm |
| Stack | 614mm | 615 | +1 mm |
| Head tube angle | 64.8° | 65.5 | +0.7° |
| Effective top tube | 605mm | 599 | −6 mm |
| Chainstay length | 436mm | 435 | −1 mm |
| Wheelbase | 1203mm | 1200 | −3 mm |
| BB drop | 31.2mm | 30 | −1 mm |
| BB height | 348mm | 345 | −3 mm |
| Standover | 722mm | 700 | −22 mm |
| Seat tube length | 415mm | 380 | −35 mm |
| Fork length | 566mm | not listed | |
| Head tube length | 96mm | 94 | −2 mm |
| Seat tube angle | not listed | 76.9 |
Differences are the Kona Process CR/DL minus the Revel Rascal Frame Kit. Full charts: 2026 Revel Rascal Frame Kit, 2025 Kona Process CR/DL.
Where each sits in its class
Revel Rascal Frame KitKona Process CR/DL
Each bike is ranked against the other trail bikes on Quiver, on frame geometry alone. Not your hand position or ride feel.
What each ships with
The stock build of each bike's first listed trim. Parts that match are dimmed.
| Part | Revel Rascal Frame KitFrame Kit | Kona Process CR/DL134 CR/DL |
|---|---|---|
| Frame | Revel Rascal | Kona Process |
| Rear shock | RockShox SDLX Ultimate | RockShox Super Deluxe Ultimate Trunnion |
| Headset | Cane Creek 40 Series | FSA Orbit 1.5E |
| Fork | not listed | RockShox Pike Ultimate Charger 2.1 RC2 |
| Shifter | not listed | SRAM Pod Controller |
| Derailleur | not listed | SRAM GX Eagle |
| Cassette | not listed | SRAM GX Eagle |
| Crankset | not listed | SRAM GX Eagle Transmission |
| Bottom bracket | not listed | SRAM DUB PF92 |
| Wheelset | not listed | DT Swiss 350 |
| Tire | not listed | Maxxis Minion DHF, Maxxis Dissector |
| Brake | not listed | SRAM G2 RSC |
| Rotor | not listed | SRAM CenterLine |
| Handlebar | not listed | Kona XC/BC 35 |
| Stem | not listed | Kona XC/BC |
| Grips | not listed | Kona Key |
| Dropper post | not listed | RockShox Reverb Stealth |
| Saddle | not listed | WTB Volt |
Know what is on every bike.
Add your bike to Quiver. Keep its parts, setup, and service history together, then share your build.
Explore the app
